中文版 | English
    • Home>Product>Fully automatic coating grading line

    Fully automatic coating grading line

    • Product number:

    Product Details

    1. Equipment introduction


    　　Battery core online: the battery core is transported from the logistics line to the loading position, and the battery core is online to the rubber-coated wire body.


    　　Battery core coating: After the battery cell enters the encapsulating machine, it passes through the code scanning/weighing/thickness measurement/covering/folding/sticking the insulation meson, and then flows to the binning station after scanning the code again;


    　　 Battery cell division: The battery cell after the film is scanned by the code scanning device to read the gear data, and the three-axis manipulator places the battery cell on the channel of each gear according to the read gear information.


    　　 Cells offline: Cells are transferred on the conveyor line after being divided into stages, and the cells of the same stage are manually put into the blue turnover box, and transferred to the pallet for buffering manually.


    2. Equipment process

    　　image.png

    3. Equipment parameters  

     

    Serial number

    Process requirements

    Specific parameters

    1

    Weighing range

    0-5kg

    2

    Weighing accuracy

    ±0.1 g (equipment accuracy 0.01g)

    3

    Thickness measurement range

    20～60mm

    4

    Thickness measurement accuracy

    ±0.1mm (equipment accuracy 0.01mm)

    5

    Thickness measurement pressure

    Range 4-100kg, accuracy ±1.5kg

    6

    Glue spacing

    20-100mm

    7

    Pull film tension

    Adjustable tension value

    8

    Folding size of pole surface

    2-6mm

    9

    Patch offset

    ≤0.5mm

    10

    Qualified rate of encapsulation (incoming material control)

    99.5%

    11

    Number of bins

    9 gears

    12

    Equipment utilization rate

    98%

    13

    noise

    ≤70db

     


    Core technical capabilities